A spot is a short item that airs at set minutes of every hour: a station ID at the top of the hour, an ad break at :30, a weather update at :15. Each spot rule picks from one playlist and plays at the minutes you choose, in one of two ways:
- Cut in: the song on air fades out, the spot plays, then the next song starts.
- Over the music: the music dips, your clip plays on top, then the music comes back up. The song keeps playing.
Create a spot
- Put your IDs or ads in a playlist of their own.
- Go to Spots & IDs in your station's sidebar, under Programming.
- Click Add spot.
- Fill in the form:
- Name: how the spot appears in the list, for example "Station ID".
- Playlist: type to search your playlists and click the one that holds your spots. The form shows how many tracks it has and their average length.
- Play: how many tracks air each time (see below).
- Minutes past the hour: tick one or more of :00, :15, :30 and :45. For any other minute, type it in Custom, for example
10, 20, 50. Ticked and typed minutes work together. - Days: the days of the week the spot plays. All seven are on to start with (see below).
- Hours: All day, or Set hours to play only between two hours (see below).
- How it plays: Cut in or Over the music (see below).
- Also play during scheduled shows: leave it on to air the spot during your scheduled playlist shows too.
- Check the Next line at the bottom of the form. It lists the next three times the spot plays, in your station's time zone, leaving out the days and hours you turned off.
- Click Save spot.
The spot appears in the list as a sentence, for example "Station ID · one at random · at :00 and :30 · cuts in", or "... · over the music". A spot limited to some days or hours says so, for example "Weekend ID · one at random · at :00 · weekends · 6:00 to 23:00 · cuts in".
Choose days and hours
By default a spot plays every day of the week, at every hour. To limit it, for example to run a weekend-only ID or to keep IDs out of the night:
- Days: turn off the days the spot should skip. At least one day must stay on. In the list, Monday to Friday reads "weekdays" and Saturday and Sunday read "weekends".
- Hours: choose Set hours, then pick the hours in From and to. Both hours count: from 6:00 to 23:00 plays at every minute you chose from 6:00 through 23:59, so a spot at :00 and :45 plays from 6:00 to 23:45. An end hour before the start hour runs past midnight: from 22:00 to 2:00 plays from 22:00 through 2:59. Days and hours are checked together, minute by minute: with only Saturday ticked, from 22:00 to 2:00 plays early Saturday until 2:59 and late Saturday from 22:00, not early Sunday.
Days and hours follow your station's time zone, the same clock as the minutes past the hour. A minute outside the days or hours is skipped and doesn't play later. To play the spot all day again, choose All day.
Only tracks in the playlist count. Tag items and Request items in the playlist are not used for spots. If the playlist has no track a spot can play, the form warns you, and the spot airs nothing until you add tracks.
Keep spots out of library shuffle
When AutoDJ plays from your whole library, for example when nothing is scheduled, library shuffle can pick any track, so an ID or an ad can air between songs as if it were one. To stop that, use a tag:
- In Media, open the Tags tab and edit the tag your spots carry, for example "station id". If they don't have one yet, tag them first. See Tags.
- Tick Keep out of library shuffle, then click Save.
Library shuffle then never picks a track with that tag, including the backup shuffle your station plays on its own when CloudRadio has nothing for it. The tag doesn't stop the track anywhere else: it still plays in your spots, in any playlist that includes it by name, and through a tag slot, for this tag or any other.
Nothing changes until you tick the box, so a station that wants its IDs in the shuffle can leave it off.
Choose what plays
| Option | What airs at each minute |
|---|---|
| One at random | One track picked at random from the playlist. |
| One in order | The next track in the playlist's order, so each time airs a different one. |
| All of them | Every track in the playlist, back to back, in order. Use it for an ad break. Not offered for Over the music, which plays one clip at a time. |
How cut in works
With Cut in, the current song fades out and does not come back. Your spot plays, then the next song starts.
When the minute comes, the song fades out over about a second, then your spot starts. The fade is the same with Smart crossfade and with No overlap (see Transitions), and on a station with no crossfade at all. A song that ends cold fades the same way.
A song with a long ending fade takes longer to give way. The ending fade is the Next track starts band in the waveform editor. When that band is longer than about a second, the song plays on for a few seconds first, up to about 15 for the longest bands, then fades out under the first second of your spot, or half a second with No overlap. Your spot always plays whole, even a station ID of a few seconds.
Cut in needs the latest station update. Until your station has it, the form and the list show a notice and these spots play nothing. If your dashboard shows Runtime update available, click Update runtime there.
If two spots share a minute, they play back to back in the order you created them, after a single cut.
If a scheduled show starts on the same minute, the song on air is cut, the spot plays, then the show starts. A show with a soft start is no exception: the spot doesn't wait for the song to finish.
If the show's first track is already on air when the minute comes, with a hard or a soft start, nothing is cut: the show's first two tracks play, then the spot, then the rest of the show.
If a scheduled relay ends on the same minute, the spot is the first thing AutoDJ plays after it.
How over the music works
With Over the music, the music on air dips to a lower level and your clip plays on top of it. When the clip ends, the music comes back up. Nothing stops, skips or restarts: the song keeps playing underneath, and listeners keep seeing its title.
Use it for short clips, like a station ID of a few seconds. Only clips up to 60 seconds play over the music: longer tracks in the playlist are left out, and the form's track count and average length leave them out too. If no track in the playlist is short enough, the form warns you and the spot plays nothing. If the clips are longer than 15 seconds on average, the form warns you too: long clips work better as a cut in.
An over the music spot plays while AutoDJ is on air and also over a relay, but never over a live DJ, Cloud Booth or guests. It does not appear in the queue, so the dashboard's Next and Then lines don't show it, and it isn't added to your play history.
The music dips first. Your clip starts once the music is down, and the music comes back up after your clip ends.
To change how the music dips, open Advanced in the form:
| Setting | What it does | Default |
|---|---|---|
| Music level while it plays | How loud the music stays under your clip, from 0% (silent) to 50%. Your clip plays a little quieter as you raise it, so the two together stay at the music's usual level. | 30% |
| Music fades down over | How long the music takes to dip. Your clip starts once it has. | 0.5 seconds |
| Music comes back over | How long the music takes to come back up after your clip ends. | 1 second |
Only one clip plays over the music at a time:
- If two over the music spots share a minute, only one plays: the first, in the order you created them, that has something to play.
- If a cut-in spot plays at the same minute, the over the music spot is skipped.
- If a clip is still playing when the next one is due, the new one is skipped.
Over the music needs the latest station update. Until your station has it, the form shows a notice and these spots play nothing. If your dashboard shows Runtime update available, click Update runtime there.
When spots don't play
A spot that cuts in only plays while AutoDJ is on air. It skips its minute:
- while a live DJ is on air, including Cloud Booth and guests,
- while a relay is on air,
- during a scheduled relay slot,
- when Studio has no recent report of what your station is playing, for example while AutoDJ is offline,
- during a scheduled playlist show, when Also play during scheduled shows is off,
- when the playlist has no track a spot can play,
- while your station doesn't have the latest station update,
- on a day or at an hour the spot is turned off for, judged by the minute's own time on your station's clock.
A spot over the music skips its minute in the same cases, except that it plays over a relay. With Also play during scheduled shows off, it also skips scheduled relay shows.
A skipped minute doesn't play later. After a station outage, minutes more than three minutes old are skipped too. A spot still waiting five minutes after its time is dropped, unless it was already lined up to play next.
A scheduled live DJ slot doesn't stop spots on its own: while no DJ is connected and AutoDJ plays, spots play as usual.
Timing
Timing is to the minute, not to the second. A spot that cuts in starts within the minute you chose. A spot over the music starts within about a minute of it, and is skipped if it can't start by then. Saving a spot, or switching it on, never plays a minute that already passed.
Turn off, edit or delete a spot
- To pause a spot, use its switch in the list. It shows Off and stops playing until you switch it back on.
- To change it, click its edit icon.
- To remove it, click its delete icon and confirm. The playlist and its tracks stay in your library.
If you delete the playlist a spot uses, the spot stays in the list with a warning and plays nothing. Edit it to pick another playlist.
See spots coming up
On your dashboard, the Next and Then lines show a Spot badge when the item coming up is a spot.
Who can manage spots
The station owner, station managers and music controllers can create, edit and delete spots. DJs can't open the page. See Users and roles.